| all proceeds benefit
| |  | Office Products | Home » » Leviton IPP15-1LI Decora Manual-ON Occupancy Sensor, Single Pole, 3-Way or More Applications, 180-Degree Field of View, Ivory | | | | | | | Description: | | 1800W@120V INC 1800VA FL, 120 Volt AC 60Hz, Single-Pole & 3-Way Manual ON, 180 Degree, 900 Sq. Ft. Coverage, Decora Passive Infrared Wall Switch Occupancy Sensor, Residential Grade - Ivory California Title 24 2005 Compliant, UPC: 07847729389 | | | Features: | |
• Manual-ON automatic OFF operation in accordance with California Title 24 2005 requirements
• 180-degree field of view and 900 sq. ft. of coverage are perfect for use in bathrooms or basements or garages and a variety of other residential areas
• Low-profile design eliminates an obtrusive scanning device look
• Convenient push-button provides manual ON/OFF light switching at any time
• Segmented fresnel lens provides optimum sensitivity and performance. It is designed with an extensive "minor motion" area where even slight body movements will be detected
| | | Product Details: | | | Product Length:
| 4.5 inches | | Product Width:
| 2.75 inches | | Product Height:
| 2.5 inches | | Package Length:
| 4.6 inches | | Package Width:
| 2.9 inches | | Package Height:
| 2.6 inches | | Package Weight:
| 0.2 pounds | | Average Customer Rating:
|  based on 28 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 28 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
65 of 71 found the following review helpful:
note the MANUAL ON in the descriptionMar 30, 2008
By Sid V
"Sid"
Does what it is supposed to do. Works with CFL's and that is a plus. However I really wanted a product that would turn the lights on with motion. This does not do that. You must turn the lights on by pressing the switch. The lights will stay on as long as it detects motion. If it does not detect motion it will turn the lights off. You can specify how long to leave the lights on after it stops sensing motion.
18 of 18 found the following review helpful:
 Pricy, but unique enough to warrant itNov 02, 2008
By R. Holman
"the_holmboy"
I purchased these for a bathroom & hallway in which my 'tween boys constantly leave the lights on. I like the fact that it cannot be left on indefinitely without occasional motion and it has to be turned on each time. It also acts as a timer in the bathroom -- I told my son who likes long showers, when the lights go out, his shower time is up. Very nice. For the hallway, which has 2 switches in 3-way, I had to buy another Leviton switch (the VZ0SR) to get it to work, but that wasn't a big deal. These are perfect if you want manual control each time vs. auto on, which these do not do. Leviton & Cooper both make cheaper versions for automatic-on functionality. Of course, their cheaper versions do not let you use CFLs, which have electronic ballasts, so you get what you pay for. I am running mostly CFLs with these two and they work perfectly. That is definitely a plus that pays you back for the extra $$ you will pay for these.
21 of 22 found the following review helpful:
Great switch, allows for Title-24 compliance.Aug 23, 2009
By Joshua Senecal
Before I begin, let me say that if you're going to do any sort of wiring project it's up to you to learn about applicable codes and regulations, from reliable sources. Do the job right. Get the needed permits and inspections. Get an electrician, if you have to.
I live in Alameda County, California, where we have to be Title 24 compliant. According to the city permit desk, and as I understand it, Title 24 dictates that all lighting in bedrooms etc. needs to be energy efficient. It also indicates that for a lighting fixture to be considered "energy efficient" it cannot be possible to easily swap out the efficient bulbs (LED, CFL, etc.) with something less efficient (incandescent). The upshot is that currently most of the lighting fixtures you purchase at the major home improvement centers cannot be legally installed in your home. Why? Because it's possible to remove the CFLs that come with the fixture, and use incandescent bulbs.
Fortunately, there's a way. Title 24 also indicates that any lighting fixture can be used if it is either (1) on a dimmer, or (2) on a manual-on occupancy sensor.
My wife and I were selecting ceiling fan/light fixtures for installation in our home. When I found out about Title 24 from the city permit desk, I was worried because the ceiling fan/light combos my wife had purchased at the local home improvement store were not Title 24 compliant (nothing they sold was), and she really wanted *those* fans and lights.
This switch saved the project. I purchased several of them, and wired them to the fan's light kits. This made the whole thing compliant, and they passed inspection. Installation of the switch is easy--just make sure to read the directions. Be aware that the switch takes up more space (volume) in the box than a regular toggle-type switch, so if your box is crowded you may have to install a larger box. Also, as this is an occupancy sensor it needs to be able to "see" most of the room to work as intended. Again, this is a *manual-on* occupancy sensor switch. The only way to turn the light on is to push the button. It will turn off automatically if no movement is detected for a period of time (so don't sit too still!).
The switches are nice. They don't really stand out, and after a few days we forgot all about them. The button has an LED on it, which makes it easy to find the switch in the dark. They seem to be well-built, so unless you're really whacking the button, it should last a while.
One more thing to be aware of: even when the switch is "off" there is still voltage on the hot switched wire. It's probably very low current (I didn't touch it to find out!) as it's not enough to light the lights.
8 of 9 found the following review helpful:
How this thing is suppose to workSep 11, 2008
By Anthony
"aim"
This is an excellent energy saving device. I just installed one in our common rest room in the main floor. It functions like a normal switch with manual on/off but it shuts off when there is no motion detected by the sensor for a certain time frame base on your preference.
One reviewer wrote that he is disappointed that it doesn't turn on by itself whenever motion is detected. This is not that kind of switch. Who would want a switch that turns on each time it detected a motion even on broad daylight. If you are looking for a motion activated switch for certain application such as your always-dark basement then this is not for you. But if you are looking for a switch that turns off the light whenever somebody forgets to do so, then this is perfect! Five star for the great idea.
4 of 4 found the following review helpful:
If installing 3-way consider thisJan 04, 2009
By Alex of DC
This item works well as advertised, and the single-pole application is easy enough to install. I'm giving it less than five stars only for the lack of clarity in some of the instructions.
If you're installing it as a three-way, the instructions strongly imply that you need another Leviton product, specifically from the Vizia line, to work with it.
See all 28 customer reviews on Amazon.com
| | |
|
